Oil coolers

Oil coolers

Subcategories

Active filters

Laminova C43-182 oilcooler

Price €319.00

Length 182mm

Oil connection??JIC/AN8

Water connection????38mm

Guideline for C43 coolers:

Coolant flowrates > 80 l/min:No restrictor is normally needed.

Coolant flowrates < 80 l/min: A plug or a restrictor can be used. As standard, these coolers have a fully internal by-pass in the centrehole. To increase or tune the heat performance, all coolers can be equipped with a centre hole plug to force more coolant through the coolant channels.

Laminova C43-332 oilcooler

Price €429.00

Length 332mm

Oil connection??JIC/AN10

Water connection????35mm

Guideline for C43 coolers:

Coolant flowrates > 80 l/min:No restrictor is normally needed.

Coolant flowrates < 80 l/min: A plug or a restrictor can be used. As standard, these coolers have a fully internal by-pass in the centrehole. To increase or tune the heat performance, all coolers can be equipped with a centre hole plug to force more coolant through the coolant channels.

Laminova C43-332 oilcooler

Price €449.00

Length 332mm

Oil connection??JIC/AN8

Water connection????35mm

Guideline for C43 coolers:

Coolant flowrates > 80 l/min:No restrictor is normally needed.

Coolant flowrates < 80 l/min: A plug or a restrictor can be used. As standard, these coolers have a fully internal by-pass in the centrehole. To increase or tune the heat performance, all coolers can be equipped with a centre hole plug to force more coolant through the coolant channels.

Laminova C43-92 oilcooler

Price €259.00

Length 92mm

Oil connection??1/2" BARBED

Water connection????24mm

Guideline for C43 coolers:

Coolant flowrates > 80 l/min:No restrictor is normally needed.

Coolant flowrates < 80 l/min: A plug or a restrictor can be used. As standard, these coolers have a fully internal by-pass in the centrehole. To increase or tune the heat performance, all coolers can be equipped with a centre hole plug to force more coolant through the coolant channels.

Laminova S34-194 oilcooler

Price €399.00

Length 124mm

Oil connection??JIC6; M14x1

Water connection????24mm

The S34 cooler is available as standard in one size, S34-194. The S34 cooler is a compact cooler. It can be used only in low oil-flow cooling applications. The S34 is very well suited for transmissions, rear ends and motorcycle uses. A plug can be used.