Oil coolers and accessories
Oil coolers and accessories
Subcategories
Active filters
CNR oil cooler TH10 size 330x76x51 mm inlets AN8
??? Universal oil cooler
??? Adapter 3/4" 16-UNF
CNR oil cooler TH13 size 330x100x51 mm inlets AN8
??? Universal oil cooler
??? Adapter 3/4" 16-UNF
CNR oil cooler TH16 size 330x116x51 mm inlets AN8
??? Universal oil cooler
??? Adapter 3/4" 16-UNF
CNR oil cooler TH19 size 330x138x51 mm inlets AN8
??? Universal oil cooler
??? Adapter 3/4" 16-UNF
CNR oil cooler TH25 size 330x198x51 mm inlets AN8
??? Universal oil cooler
??? Adapter 3/4" 16-UNF
CNR oil cooler TH30 size 330x238x51 mm inlets AN8
??? Universal oil cooler
??? Adapter 3/4" 16-UNF
CNR oil cooler TH9 size 330x63x50 mm inlets AN8
??? Universal oil cooler
??? Adapter 3/4" 16-UNF
Threads 3/4 UNF / 20x1.5 mm
Thickness 32mm
Built in thermostat
Oil goes to cooling when temp is over 71 ??C and is fully open at 82 ??C
2pcs AN8 female outlets straight
2pcs AN8 female outlets 45 degree
2pcs AN male-male adaptes
2pcs AN8 plugs
Billet alu
Black
GB SF00101-01S Oil Filter Relocate Kit
filter thread 3/4" UNF
4pcs 1/2" BSP female outlets
2pcs 1/2" BSP - AN8 adapters
2pcs 1/2" BSP plugs
Billet alu
Black
Inlet/Outlet 1/2" BSP female
Center thread 3/4 UNF / 20x1.5 mm
Two 1/8 NPT hoses for sensors (oil temp,press)
includes 2pcs 1/2" BSP - AN8 adapters
Billet alu
Black
GB SF00101-04S Block off cap 3/4 16 thread
Suits our 3/4 16 block adaptors to run remote oil filter mount. suits many Ford, Toyota and Nissan models.
Laminova C43-182 oilcooler
Length 182mm
Oil connection??JIC/AN8
Water connection????38mm
Guideline for C43 coolers:
Coolant flowrates > 80 l/min:No restrictor is normally needed.
Coolant flowrates < 80 l/min: A plug or a restrictor can be used. As standard, these coolers have a fully internal by-pass in the centrehole. To increase or tune the heat performance, all coolers can be equipped with a centre hole plug to force more coolant through the coolant channels.
Laminova C43-332 oilcooler
Length 332mm
Oil connection??JIC/AN8
Water connection????35mm
Guideline for C43 coolers:
Coolant flowrates > 80 l/min:No restrictor is normally needed.
Coolant flowrates < 80 l/min: A plug or a restrictor can be used. As standard, these coolers have a fully internal by-pass in the centrehole. To increase or tune the heat performance, all coolers can be equipped with a centre hole plug to force more coolant through the coolant channels.
Laminova C43-332 oilcooler
Length 332mm
Oil connection??JIC/AN10
Water connection????35mm
Guideline for C43 coolers:
Coolant flowrates > 80 l/min:No restrictor is normally needed.
Coolant flowrates < 80 l/min: A plug or a restrictor can be used. As standard, these coolers have a fully internal by-pass in the centrehole. To increase or tune the heat performance, all coolers can be equipped with a centre hole plug to force more coolant through the coolant channels.
Laminova C43-92 oilcooler
Length 92mm
Oil connection??1/2" BARBED
Water connection????24mm
Guideline for C43 coolers:
Coolant flowrates > 80 l/min:No restrictor is normally needed.
Coolant flowrates < 80 l/min: A plug or a restrictor can be used. As standard, these coolers have a fully internal by-pass in the centrehole. To increase or tune the heat performance, all coolers can be equipped with a centre hole plug to force more coolant through the coolant channels.
Laminova Oil Connection C43/45 JIC8
Laminova S34-194 oilcooler
Length 124mm
Oil connection??JIC6; M14x1
Water connection????24mm
The S34 cooler is available as standard in one size, S34-194. The S34 cooler is a compact cooler. It can be used only in low oil-flow cooling applications. The S34 is very well suited for transmissions, rear ends and motorcycle uses. A plug can be used.
Laminova WC gasket for C43/45 coolers
Oil Filter Adapter for Steel Flex Armoured Hose
- Connection Set??
- Oil Filter Adapter??
- 16-UNF (3/4 Inch)
- M20 x 1.5
Remote oil filter adapter 1/2 BSP
Remote oil filter adapter 1/2 NPTF
Remote oil filter adapter Takes filter with 3/4UNF thread, 1/2NPTF ports flow both ways, blanking plugs included
Remote oil filter adapter Takes two filters with 3/4UNF thread in parallel, 1/2NPTF ports flows either way, blanking plugs inc
REVOTEC Oil Cooler Duct 13 Row
Supplied with laser cut aluminium mounting brackets and all fittings. Formed from HDPE to ensure reliability. Stepped inlet to accommodate two sizes of ducting.
Supplied with Pull Through Kit for mounting. Formed from HDPE to ensure reliability.
Technical Information:
Width: 260mm
Height: 100mm
Depth: 160mm
Inlet: 76/63mm
Material: HDPE
REVOTEC Oil Cooler Duct 16 Row
Supplied with laser cut aluminium mounting brackets and all fittings. Formed from HDPE to ensure reliability. Stepped inlet to accommodate two sizes of ducting.
Supplied with Pull Through Kit for mounting. Formed from HDPE to ensure reliability.
Technical Information:
Width: 260mm
Height: 120mm
Depth: 160mm
Inlet: 89/76mm
Material: HDPE
REVOTEC Oil Cooler Duct 19 Row
Supplied with laser cut aluminium mounting brackets and all fittings. Formed from HDPE to ensure reliability. Stepped inlet to accommodate two sizes of ducting.
Supplied with Pull Through Kit for mounting. Formed from HDPE to ensure reliability.
Technical Information:
Width: 260mm
Height: 140mm
Depth: 160mm
Inlet: 76/63mm x2
Material: HDPE
- Connection Set??
- Oil Filter Adapter??
- 1,25 m Armoured Hose
- 16-UNF (3/4 Inch)
- M20 x 1.5