Active filters
3m Cable Extension
Includes IP68 Connectors
Suitable for RS range lamps only
3m Cable Extension
Includes IP68 Connectors
Suitable for ST, Linear and Triple-R lamps (ECE approved models only)
3m Cable Extension
Includes IP68 Connectors
Suitable for T16, T24 and T28 lamps, and Triple-R 16/24/28 only
Designed to fit the Red Top 20 and 25 batteries. Also suits the RMD 25 battery.
Internal Dimensions:-
Designed to fit Red Top 30 battery.
3mm folded aluminium side brackets
Corrosion resistant pre-treatment with black powder coat finish
A2 stainless steel hardware included
Fully adjustable allowing for lamps to be raised/lowered <3cm
Compatible with all Lazer High Performance lights - separate fixtures for Hybrid Optic and Triple-R/Carbon Series lamps
A2 grade stainless steel
Unique locking keys
For use with Lazer Centre or Side Mounting Kits (1114k / 1118k) (ST/T and Triple-R)
Unique locking key for all lamp and vehicle mounting points
Brackets pre-treated with an e-coating, then powder coated black
A2 stainless steel hardware included
Height adjustable allowing for lamps to be raised/lowered <13mm
Compatible with Linear lamps only
Velcro numbrialus, 1 tk (ühele numbrimärgile)
Peaaegu nähtamatu Velcro takjakinnitus võimaldab kinnitada numbrimärgi sõidukile kiirelt ja kindlalt, kasutamata kruvisid ja traditsioonilist numbrialust.
Kvaliteetse liimiga Velcro matt sobib maksimaalselt 520 x 110 mm mõõtudega numbrimärgi jaoks (standardmõõt), väiksemate mõõtudega numbrimärkide puhul on võimalik Velcro matt täpseks lõigata.
Paigaldamine:
Paigaldamine peab toimuma temperatuuril vähemalt 10° C.
1.Puhastage põhjalikult numbrimärgi tagakülg ja sõiduki pind, millele soovite kinnitada Velcro numbrialuse. Pinnad peavad olema tolmu-, mustuse- ja rasvavabad hea nakke saavutamiseks.
2.Kontrollige, et numbrimärgi pikkus vastaks Velcro mati pikkusele. Vajadusel kohandage Velcro matt täpseks lõikamise teel.
3.Määrake kindlaks ja märkige sõidukile õige paigaldusasend. Eemaldage Velcro mati karedamalt poolelt kleepuva osa küljest kaitsekile ja liimige see eelnevalt puhastatud pinnale.
4.Eemaldage Velcro mati pehmemalt poolelt kleepuva osa küljest kaitsekile ja liimige see eelnevalt puhastatud numbrimärgile.
5.Kinnitage numbrimärk sõiduki külge, ühendades kindlalt kaks Velcro mati poolt.
6.Numbrimärgi eemaldamiseks võtke selle vasakust või paremast servast kinni ja aeglaselt tõmmates lahutage kaks Velcro mati poolt. Pöörake tähelepanu, et te numbrimärki liigselt ei painutaks.
Input Voltage: 190/264VAC
3-stage Charging
Dimensions (mm)
without plug pins
LxWxD: 100x51x63
Weight: 0.25kg
Input Voltage:
100/240VAC
3-stage Charging
Dimensions (mm)
LxWxD: 186x88x48
Weight: 0.8kg
Compact, powerful 12V charging
Our smallest 12V charger
The XS 0.8 uses state of the art technology for charging smaller batteries on motorbikes, jet skis, ATVs and lawnmowers.
The XS 0.8 is CTEK???s smallest 12V charger and it???s suitable for charging smaller batteries as well as maintenance charging normal sized car batteries. The XS 0.8 is a compact, fully automatic 6 step charger that delivers 0.8A and charges 12V batteries from 1.2 to 32Ah and maintenance charging up to 100Ah. It???s simple to use and you can follow the whole charging process on the clear, easy to read display.
Get your powersport vehicle ready for action
Peak performance charging
Make sure you???re ready for action every time with the easy to use CT5 POWERSPORT battery charger. Get the best performance out of your powersport vehicle batteries whether you???re on land, water, snow or ice. Connect the charger direct to the battery or via the 12V CANBUS socket using the INDICATOR PLUG 12V accessory.
Your powersport vehicle always needs to be in top condition to give you the best performance possible. Powersport vehicles are sometimes stored for long periods so the CT5 POWERSPORT battery charger makes sure your batteries are charged to capacity and your vehicle is ready to go when you are. The CT5 POWERSPORT has been designed specifically to charge and maintain powersport batteries using advanced technology to give you three fully automatic charging and maintenance programs ??? Normal, AGM and Recond. You can connect it directly to the battery indefinitely, if required, and it won???t over or under charge. It???s easy to use and works with all types of powersport 12V lead acid batteries.
The charger that tells you when you???re ready to go
Take control of your day
Get your life back with the first battery charger in the world to show you exactly when your battery will be charged and ready to go.
The groundbreaking CT5 TIME TO GO battery charger and maintainer is a world first because it answers the question ???When will my battery be fully charged???? This means you can plan your day around your battery charging because the CT5 TIME TO GO gives you an accurate prediction of the remaining charging time in hours. Not only that, it???ll also tell you when you can safely try to start your vehicle before the battery is fully charged. The CT5 TIME TO GO uses advanced technology to give you three charging and maintenance programs ??? Normal, AGM and Recond. It???s easy to use and fully automatic, so it can be connected directly to the battery indefinitely, if required, and it won???t over or under charge.
Keep your START/STOP battery in peak condition
Fast Start/Stop charging
The CT5 START/STOP battery charger and maintainer has been specially designed to charge and maintain batteries in Start/Stop vehicles.
Start/Stop technology is great for the environment but it can put a considerable strain on your battery, especially if it???s in an older car. By keeping the battery fully charged, you can take full advantage of all the Start/Stop technology benefits, such as better fuel efficiency and lower CO2 emissions. If you only make short journeys, use the CT5 START/STOP once a month to keep your battery in peak condition. And if you???re going away on holiday, just connect the charger to the battery to make sure your car???s ready to go when you return.
Powerful professional charging for workshops
The ultimate charger
The MXS 10 gives you state of the art technology and is ideal for professional use in workshops for caravan, RV, boat and car batteries.
The MXS 10 is a fully automatic 8-step charger that delivers 10A to 12V batteries from 20-200Ah and is also suitable for maintenance charging up to 300Ah. It includes battery diagnosis to establish whether your battery can receive and retain a charge, a Recond mode for restoring and reconditioning stratified and deeply discharged batteries, a winter program for charging in cold weather and an AGM option which maximises the performance life of most Stop/Start batteries. The MXS 10 also has a temperature sensor for optimised charging and it can even be used as a power supply source for 12V equipment.
The ideal charger for everyday use
Fast, all weather charging
The MXS 3.8 is an advanced battery charger and maintainer. It has selectable programs for use on different sized batteries and special programs for desulphation, and charging on cold days.
The MXS 3.8 microprocessor controlled 7 step battery charger and maintainer is suitable for batteries from 1.2Ah-85Ah. Features include battery diagnosis to establish whether your battery can receive and retain a charge, a patented desulphation program and a ???Snowflake??? program for charging on cold days. It also includes selectable programs for charging smaller and normal batteries. The MXS 3.8 uses CTEK???s patented float/pulse system, which is the most efficient maintenance mode when a battery is connected for long periods. The MXS 3.8 is simple to use and you can follow the whole charging process on the clear, easy to read display.
The ultimate in battery charging and testing
Connect, test and charge
The MXS 5.0 TEST & CHARGE combines an advanced microprocessor controlled battery charger with a battery and alternator testing function to keep your battery in the best condition possible.
The MXS 5.0 TEST & CHARGE is suitable for use with batteries from 1.2Ah-110Ah. Its testing function gives you three easy to use programs to test battery voltage, start power and alternator performance to give you a complete picture of battery and vehicle charging system health. The MXS 5.0 TEST & CHARGE also includes a patented automatic desulphation program, a special Recond mode for reconditioning deeply discharged batteries and CTEK???s patented float/pulse system, which is the most efficient maintenance mode when a battery is connected for long periods.
Advanced charging with temperature compensation
Cold weather performance
The MXS 5.0 comes with automatic temperature compensation for the best charging performance, even in extreme conditions.
The MXS 5.0 is an advanced microprocessor controlled battery charger which gives unrivalled performance for lead acid batteries from 1.2-110Ah. It comes with automatic temperature compensation built in which ensures the best charging performance, even in the most extreme conditions. The MXS 5.0 also includes battery diagnosis to establish whether your battery can receive and retain a charge, patented automatic desulphation program, an AGM option which maximises the performance life of most Stop/Start batteries and a special Recond mode for reconditioning deeply discharged batteries. The MXS 5.0 uses CTEK???s patented float/pulse system, which is the most efficient maintenance mode when a battery is connected for long periods.
The perfect universal 12V charger
Larger battery performance
The MXS 7.0 is perfect for charging the larger batteries that you find in RVs, boats caravans and cars.
The MXS 7.0 is a fully automatic 8-step charger that delivers 7A to 12V batteries from 14-150Ah and is also suitable for maintenance charging up to 225Ah. It includes battery diagnosis to establish whether your battery can receive and retain a charge, a special Recond mode for restoring and reconditioning stratified and deeply discharged batteries, a winter program for charging in cold weather and an AGM battery option. The MXS 7.0 can even be used as a power supply source for 12V equipment up to 7A.
Compact charging for your vintage car
Clear charging and maintenance
The XC 0.8 can give your vintage car a new lease of life. And, as you can keep the charger permanently connected in its maintenance mode, you???re always ready to get out on the road.
The XC 0.8 is a compact 4 step 6V charger that delivers 0.8A and charges and maintains 6V batteries from 1.2-100Ah. It???s simple to use and you can follow the whole charging process on the clear, easy to read display. After charging, the XC 0.8 will automatically switch to its maintenance phase using CTEK???s patented pulse charging, which is the most efficient mode if a battery is connected for long periods, so the charger can be permanently connected to your vehicle.
Universal light mounting frames
Suitable for: 2x Triple-R 1000
Allows for 2 way adjustable light direction
Design to fit any vehicle
Machined & anodised billet Aluminium
Fully adjustable stainless steel struts
Design and Invention patents pending
Enables Can-Bus interface integration without the need for metal-to-metal connection
Uses induction method thereby protecting manufacturer's warranty
Compatible with CANM8 Cannect Highbeam
Works on 5v power connection
Can-Bus interface provides a quick solution for detecting high beam activity
Easy to install
Compatible with most modern vehicles
Brand: BORT
Compressor capacity, L/min: 12
Current, A: 5
Max pressure, bar: 7
Voltage, V: 12
Display: Mechanical
Power consumption, W: 60
No-load speed, rpm: 1 500
Product weight, kg: 0,65
Specifications
Brand: BORT
Compressor capacity, L/min: 25
Current, A: 14
Max pressure, bar: 7
Voltage, V: 12
Display: Mechanical
Power consumption, W: 150
No-load speed, rpm: 5 000
Product weight, kg: 1,6
Suitable for when regulations specify a limit on maximum number of LEDs in operation
Ultra lightweight, carbon-fibre housing
Next generation high intensity LED technology to achieve maximum range
Carefully selected LED colour temperature maximises sharpness and definition
Compatible with Lazer???s Reeded Lens to modify the beam pattern
CAE optimised heatsink requires minimal airflow to maintain 100% light output
Electronic thermal management
Low profile design for improved aerodynamic performance
Fitted with male/female Binder connectors
Supplied with Universal Single Lamp Mount and Neoprene Impact Cover
???Unbreakable??? polycarbonate lens
IP67 watertight
5-year warranty
Designed & manufactured in Britain
Ultra lightweight, durable, carbon-fibre housing
Next generation high intensity LED technology to achieve maximum range
Available in Spot or Reeded lens options; lamp can be mounted in a horizontal or vertical orientation??
Carefully selected LED colour temperature maximises sharpness and definition
CAE optimised heatsink requires minimal airflow to maintain 100% light output
Electronic thermal management
Low profile design for improved aerodynamic performance
Fitted with male/female Binder connectors
Supplied with 3mm folded aluminium side brackets
???Unbreakable??? polycarbonate lens
IP67 watertight
5-year warranty
Designed & manufactured in Britain
Ultra lightweight, carbon-fibre housing
Next generation high intensity LED technology to achieve maximum range
Highly reflective, vacuum-metallised reflector system
Carefully selected LED colour temperature maximises sharpness and definition
Compatible with Lazer???s Reeded Lens to modify the beam pattern
CAE optimised heatsink requires minimal airflow to maintain 100% light output
Electronic thermal management
Low profile design for improved aerodynamic performance
Fitted with male/female Binder connectors
Supplied with Universal Single Lamp Mount and Neoprene Impact Cover
???Unbreakable??? polycarbonate lens
IP67 watertight
5-year warranty
Designed & manufactured in Britain
