Pedal box

Pedal box

Active filters

RALLY DESIGN DASH ADJUSTER - STEEL TUBE TYPE
  • Out-of-Stock

This dash adjuster is designed with a 7/16 UNF fitting on the balance bar end to fit onto our balance bar part RD3613.

Please note:This will not fit to the Wilwood balance bar, if you need a dash adjuster for the Wilwood type please see part 340-4990

RALLY DESIGN ESCORT RS/CAPRI - M16 SPACER KIT
  • Out-of-Stock

This kit expands the existing M16 calipers fitted to the Escort RS/ Capri to accept Group 1 vented discs (247 x 20mm)

Cast iron calipers do not have the unsprung weight advantage and heat dissipation properties of the Wilwood aluminium calipers but for the competitor on a tight budget, not seeking the ultimate performance, they do represent a considerable cost saving.

RALLY DESIGN Universal Bulkhead Balance Bar Box
  • Out-of-Stock

A universal design of pedal box which can be mounted outside of the vehicle cockpit on the bulkhead.

Mounted inline with the brake pedal the box is operated via a single pushrod onto the balance bar housing.

Easy to install.

Complete with balance bar and cylinders. (as pictured).

This RMD product is now supplied with a double lip sealed RMD OEM spec master cylinder.??

RALLY DESIGN Universal Floor Mounted Kit Car Pedal Box
  • Out-of-Stock

Kit Contents:-

  • 1 x Universal Floor Mounted Kit Car Pedal Box
  • 1 x Balance Bar Assembly
  • 1 x RMD 0.625 Non Integral Master Cylinder
  • 1 x RMD 0.700 Non Integral Master Cylinder 
  • 1 x RMD 0.750 Non Integral Master Cylinder 

Dimensions:-

  • Pedal Ratio: 5.1:1
  • Total Width: 205mm
  • Box Depth: 125mm
  • Box Height: 110mm
  • Total Height (inc pedals): 255mm

This RMD product is with a double lip sealed RMD OEM spec master cylinder.  If you prefer Wilwood branded cylinders then please select from the drop down below. 

 

TILTON 600-Series Firewall-Mount Steel Pedal Assembly
  • Out-of-Stock

Tilton???s 600-Series pedal assemblies feature traditional fixed-mount master cylinder and balance bar technology and provide excellent performance at competitive prices. Pedal assemblies are available in floor-mount, firewall-mount and overhung configurations.

Features:

  • Forged aluminum pedals with adjustable (vertical & horizontal) foot pads and anti-slip surfaces.
  • Adjustable pedal ratios (5.29:1, 5.44:1, 5.61:1, 5.75:1) enable the brake pedal??to be tuned to driver preference without having to change master cylinder bore size.
  • Large diameter 7/16???-20 balance bar provides maximum rigidity. PTFE coated aluminum clevises for increased durability and reduced friction.
  • Pedal pivots feature wave washers to reduce lateral pedal movement and oil??impregnated bronze bushings decrease stiction.
  • Lightweight aluminum frame features guide ???ramps??? to reduce balance bar tipping, decreasing friction and improving brake repeatability.
  • Adjustable clutch pedal stop prevents clutch over-stroking.
TILTON 600-Series Firewall-Mount Steel Pedal Assembly
  • Out-of-Stock

Tilton???s 600-Series 3-pedal floor mount assembly features traditional fixed-mount master cylinder and balance bar technology and provide excellent performance at competitive prices. Pedal assemblies are available in floor-mount, firewall-mount and overhung configurations.

Features:

  • Forged aluminum pedals with adjustable (vertical & horizontal) foot pads and anti-slip surfaces.
  • Adjustable pedal ratio (5.29:1, 5.44:1, 5.61:1, 5.75:1) enable the brake pedal to be tuned to driver preference without having to change master cylinder bore size.
  • Large diameter 7/16???-20 balance bar provides maximum rigidity. ??PTFE coated aluminum clevises for increased durability and reduced friction.
  • Pedal pivots feature wave washers to reduce lateral pedal movement and oil impregnated bronze bushings decrease stiction.
  • Lightweight aluminum frame features guide ???ramps??? to reduce balance bar tipping, decreasing friction and improving brake repeatability.
  • Adjustable clutch pedal stop prevents clutch over-stroking.
TILTON 600-Series Firewall-Mount Steel Pedal Assembly
  • Out-of-Stock

Tilton???s 600-Series pedal assemblies feature traditional fixed-mount master cylinder and balance bar technology and provide excellent performance at competitive prices. Pedal assemblies are available in floor-mount, firewall-mount and overhung configurations.

Features:

  • Fabricated steel pedals with anti-slip surfaces.
  • Large diameter 7/16???-20 balance bar provides maximum rigidity. PTFE coated aluminum clevises for increased durability and reduced friction.
  • Pedal pivots feature wave washers to reduce lateral pedal movement and oil impregnated bronze bushings decrease stiction.
  • Lightweight aluminum frame features guide ???ramps??? to reduce balance bar tipping, decreasing friction and improving brake repeatability.
  • Adjustable clutch pedal stop prevents clutch over-stroking.
Wilwood Floor Mount Three Pedal Assemblies Peda Box
  • Out-of-Stock

Pedal Type: Throttle/Brake/Clutch

Gas Pedal Shape: Rectangle

Brake Pedal Shape: Rectangle

Clutch Pedal Shape: Rectangle

Pedal Mounting Location: Floor mount

Pedal Ratio: 5.25:1

Throttle Cable Included: No

Balance Bar Included: Yes

Master Cylinder Included: No

Master Cylinder Style: Single

Pedal Material: Aluminum

Pedal Finish: Black

Pedal Pad Material: Anti-slip surface

Pedal Pad Finish: Black