Clutch kits and parts

Clutch kits and parts

Active filters

WORLD RX

Aimed at rallycross drivers, this triple plate carbon clutch is designed to be one of the most competitive clutches on the market. Built on the success of its predecessor, our new clutch is approximately 10% lighter and offers 18% reduction in inertia as well as an impressive 38% reduction in deflection.

This lightweight optimised clutch is engineered to provide optimal durability, better heat management and championship-winning performance in challenging rallycross competition. The new Alcon rallycross clutch will give the driver the best possible start through increasing the stiffness and reducing the deflection of the clutch.

PRESSURE PLATE 1-disc 184MM
  • Out-of-Stock

Torque capacity: 160Nm(118lb/ft).
Popular clutch plates:
7/8" x 20 spline - CP8300-A026H (3 paddle); CP8400-A026 (4 paddle); CP8600-A026 (6 paddle)
1" x 23 spline - CP8300-A036H (3 paddle); CP8400-A036H (4 paddle); CP8600-A036H (6 paddle)
20mm x 17 spline - CP8300-A017 (3 paddle)
Replacement spare parts:
Wear clips - CP4111-102
Main pressure plate - CP3108-103
Use clutch to flywheel bolt FP452 (for flywheels with 5/16UNF holes).

PRESSURE PLATE 1-disc 184MM
  • Out-of-Stock

Torque capacity: 413Nm(305lb/ft).
Popular clutch plates:
7/8" x 20 spline - CP8300-A026H (3 paddle); CP8400-A026 (4 paddle); CP8600-A026 (6 paddle)
1" x 23 spline - CP8300-A036H (3 paddle); CP8400-A036H (4 paddle); CP8600-A036H (6 paddle)
20mm x 17 spline - CP8300-A017 (3 paddle)
Replacement spare parts:
Wear clips - CP4111-102
Main pressure plate - CP3108-103
Use clutch to flywheel bolt FP452 (for flywheels with 5/16UNF holes).

PRESSURE PLATE 1-disc 184MM
  • Out-of-Stock

Torque capacity: 259Nm(191lb/ft).
Popular clutch plates:
7/8" x 20 spline - CP8300-A026H (3 paddle); CP8400-A026 (4 paddle); CP8600-A026 (6 paddle)
1" x 23 spline - CP8300-A036H (3 paddle); CP8400-A036H (4 paddle); CP8600-A036H (6 paddle)
20mm x 17 spline - CP8300-A017 (3 paddle)
Replacement spare parts:
Wear clips - CP4111-102
Main pressure plate - CP3108-103
Use clutch to flywheel bolt FP452 (for flywheels with 5/16UNF holes).

184mm paddle clutch assy: twin plate lug drive (green) 263nm
  • Out-of-Stock

Torque capacity: 263Nm(194lb/ft).
Popular clutch plates (2 required):
7/8" x 20 spline - CP8300-A026H (3 paddle); CP8400-A026 (4 paddle); CP8600-A026 (6 paddle)
1" x 23 spline - CP8300-A036H (3 paddle); CP8400-A036H (4 paddle); CP8600-A036H (6 paddle)
20mm x 17 spline - CP8300-A017 (3 paddle)
Replacement spare parts:
Wear clips - CP4112-102
Main pressure plate - CP3021-102
Intermediate pressure plate - CP3592-106
Use clutch to flywheel bolt FP454 (for flywheels with 5/16UNF holes).

184mm paddle clutch assy: twin plate lug drive (grey) 636nm
  • Out-of-Stock

Torque capacity: 636Nm(469lb/ft).
Popular clutch plates (2 required):
7/8" x 20 spline - CP8300-A026H (3 paddle); CP8400-A026 (4 paddle); CP8600-A026 (6 paddle)
1" x 23 spline - CP8300-A036H (3 paddle); CP8400-A036H (4 paddle); CP8600-A036H (6 paddle)
20mm x 17 spline - CP8300-A017 (3 paddle)
Replacement spare parts:
Wear clips - CP4112-102
Main pressure plate - CP3021-102
Intermediate pressure plate - CP3592-106
Use clutch to flywheel bolt FP454 (for flywheels with 5/16UNF holes).

184mm paddle clutch assy: twin plate lug drive (orange) 421nm
  • Out-of-Stock

Torque capacity: 421Nm(310lb/ft).
Popular clutch plates (2 required):
7/8" x 20 spline - CP8300-A026H (3 paddle); CP8400-A026 (4 paddle); CP8600-A026 (6 paddle)
1" x 23 spline - CP8300-A036H (3 paddle); CP8400-A036H (4 paddle); CP8600-A036H (6 paddle)
20mm x 17 spline - CP8300-A017 (3 paddle)
Replacement spare parts:
Wear clips - CP4112-102
Main pressure plate - CP3021-102
Intermediate pressure plate - CP3592-106
Use clutch to flywheel bolt FP454 (for flywheels with 5/16UNF holes).

184mm sintered clutch assy: triple plate lug drive (grey) 1272nm
  • Out-of-Stock

Torque capacity: 1272Nm(938lb/ft).
Popular clutch plates:
7/8" x 20 spline - CP2012-166FM3 (outer plate, 2 required); CP2012-179FM3 (inner plate, 1 required)
1" x 23 spline - CP2012-165FM3 (outer plate, 2 required); CP2012-178FM3 (inner plate, 1 required)
Replacement spare parts:
Wear clips - CP3913-103
Main pressure plate - CP3921-101
Intermediate pressure plate - CP3592-106
Use clutch to flywheel bolt FP454 (for flywheels with 5/16UNF holes).

184mm sintered clutch assy: triple plate lug drive (orange) 798nm
  • Out-of-Stock

Torque capacity: 798Nm(588lb/ft).
Popular clutch plates:
7/8" x 20 spline - CP2012-166FM3 (outer plate, 2 required); CP2012-179FM3 (inner plate, 1 required)
1" x 23 spline - CP2012-165FM3 (outer plate, 2 required); CP2012-178FM3 (inner plate, 1 required)
Replacement spare parts:
Wear clips - CP3913-103
Main pressure plate - CP3921-101
Intermediate pressure plate - CP3592-106
Use clutch to flywheel bolt FP454 (for flywheels with 5/16UNF holes).

AP Racing ‘Formula’ Clutch Kits are Brand New and comprise a Clutch Cover Assembly and Clutch Driven Plate. No Clutch Release Bearing is included.

The AP Racing Formula Clutch Kits has been specifically designed to meet the demands of modified high performance cars, utilising the latest technology developed from AP Racing clutches.

This kit fits Honda Integra Type R DC2 and Honda Civic 1.6 VTEC with B16A2Z

Diameter: 220mm
Torque Capacity: 245 Nm (181 lbs/ft)
Year: 1993 to 2001
Clutch Kit Type: 2 in 1 Clutch Kit
Driven Plate Type: Organic

NB - NO RELEASE BEARING

AP Racing ‘Formula’ Clutch Kits are Brand New and comprise a Clutch Cover Assembly, Clutch Driven Plate and Clutch Release Bearing.

The AP Racing Formula Clutch Kits has been specifically designed to meet the demands of modified high performance cars, utilising the latest technology developed from AP Racing clutches.

This kit fits Subaru Impreza Turbo / WRX 1993 onwards.

Diameter: 230mm
Torque Capacity: 420 Nm (310 lbs/ft)
Year: 1993>
Clutch Kit Type: 3 in 1 Clutch Kit
Driven Plate Type: Organic