Torque capacity: 160Nm(118lb/ft).
Popular clutch plates:
7/8" x 20 spline - CP8300-A026H (3 paddle); CP8400-A026 (4 paddle); CP8600-A026 (6 paddle)
1" x 23 spline - CP8300-A036H (3 paddle); CP8400-A036H (4 paddle); CP8600-A036H (6 paddle)
20mm x 17 spline - CP8300-A017 (3 paddle)
Replacement spare parts:
Wear clips - CP4111-102
Main pressure plate - CP3108-103
Use clutch to flywheel bolt FP452 (for flywheels with 5/16UNF holes).
List of products by brand AP RACING
Active filters
Torque capacity: 413Nm(305lb/ft).
Popular clutch plates:
7/8" x 20 spline - CP8300-A026H (3 paddle); CP8400-A026 (4 paddle); CP8600-A026 (6 paddle)
1" x 23 spline - CP8300-A036H (3 paddle); CP8400-A036H (4 paddle); CP8600-A036H (6 paddle)
20mm x 17 spline - CP8300-A017 (3 paddle)
Replacement spare parts:
Wear clips - CP4111-102
Main pressure plate - CP3108-103
Use clutch to flywheel bolt FP452 (for flywheels with 5/16UNF holes).
Torque capacity: 259Nm(191lb/ft).
Popular clutch plates:
7/8" x 20 spline - CP8300-A026H (3 paddle); CP8400-A026 (4 paddle); CP8600-A026 (6 paddle)
1" x 23 spline - CP8300-A036H (3 paddle); CP8400-A036H (4 paddle); CP8600-A036H (6 paddle)
20mm x 17 spline - CP8300-A017 (3 paddle)
Replacement spare parts:
Wear clips - CP4111-102
Main pressure plate - CP3108-103
Use clutch to flywheel bolt FP452 (for flywheels with 5/16UNF holes).
Torque capacity: 263Nm(194lb/ft).
Popular clutch plates (2 required):
7/8" x 20 spline - CP8300-A026H (3 paddle); CP8400-A026 (4 paddle); CP8600-A026 (6 paddle)
1" x 23 spline - CP8300-A036H (3 paddle); CP8400-A036H (4 paddle); CP8600-A036H (6 paddle)
20mm x 17 spline - CP8300-A017 (3 paddle)
Replacement spare parts:
Wear clips - CP4112-102
Main pressure plate - CP3021-102
Intermediate pressure plate - CP3592-106
Use clutch to flywheel bolt FP454 (for flywheels with 5/16UNF holes).
Torque capacity: 636Nm(469lb/ft).
Popular clutch plates (2 required):
7/8" x 20 spline - CP8300-A026H (3 paddle); CP8400-A026 (4 paddle); CP8600-A026 (6 paddle)
1" x 23 spline - CP8300-A036H (3 paddle); CP8400-A036H (4 paddle); CP8600-A036H (6 paddle)
20mm x 17 spline - CP8300-A017 (3 paddle)
Replacement spare parts:
Wear clips - CP4112-102
Main pressure plate - CP3021-102
Intermediate pressure plate - CP3592-106
Use clutch to flywheel bolt FP454 (for flywheels with 5/16UNF holes).
Torque capacity: 421Nm(310lb/ft).
Popular clutch plates (2 required):
7/8" x 20 spline - CP8300-A026H (3 paddle); CP8400-A026 (4 paddle); CP8600-A026 (6 paddle)
1" x 23 spline - CP8300-A036H (3 paddle); CP8400-A036H (4 paddle); CP8600-A036H (6 paddle)
20mm x 17 spline - CP8300-A017 (3 paddle)
Replacement spare parts:
Wear clips - CP4112-102
Main pressure plate - CP3021-102
Intermediate pressure plate - CP3592-106
Use clutch to flywheel bolt FP454 (for flywheels with 5/16UNF holes).
Torque capacity: 424Nm(313lb/ft).
Popular clutch plates:
7/8" x 20 spline - CP2012-166FM3
1" x 23 spline - CP2012-165FM3
20mm x 17 spline - CP2012-184FM3
Replacement spare parts:
Wear clips - CP3911-102
Main pressure plate - CP3911-102
Use clutch to flywheel bolt FP452 (for flywheels with 5/16UNF holes).
Torque capacity: 266Nm(196lb/ft).
Popular clutch plates:
7/8" x 20 spline - CP2012-166FM3
1" x 23 spline - CP2012-165FM3
20mm x 17 spline - CP2012-184FM3
Replacement spare parts:
Wear clips - CP3911-102
Main pressure plate - CP3911-102
Use clutch to flywheel bolt FP452 (for flywheels with 5/16UNF holes).
Torque capacity: 1272Nm(938lb/ft).
Popular clutch plates:
7/8" x 20 spline - CP2012-166FM3 (outer plate, 2 required); CP2012-179FM3 (inner plate, 1 required)
1" x 23 spline - CP2012-165FM3 (outer plate, 2 required); CP2012-178FM3 (inner plate, 1 required)
Replacement spare parts:
Wear clips - CP3913-103
Main pressure plate - CP3921-101
Intermediate pressure plate - CP3592-106
Use clutch to flywheel bolt FP454 (for flywheels with 5/16UNF holes).
Torque capacity: 798Nm(588lb/ft).
Popular clutch plates:
7/8" x 20 spline - CP2012-166FM3 (outer plate, 2 required); CP2012-179FM3 (inner plate, 1 required)
1" x 23 spline - CP2012-165FM3 (outer plate, 2 required); CP2012-178FM3 (inner plate, 1 required)
Replacement spare parts:
Wear clips - CP3913-103
Main pressure plate - CP3921-101
Intermediate pressure plate - CP3592-106
Use clutch to flywheel bolt FP454 (for flywheels with 5/16UNF holes).
Torque capacity: 327Nm(241lb/ft).
Popular clutch plates (2 required):
7/8" x 20 spline - CP2012-166FM3
1" x 23 spline - CP2012-165FM3
20mm x 17 spline - CP2012-184FM3
Replacement spare parts:
Wear clips - CP3912-102
Main pressure plate - CP3021-101
Intermediate pressure plate - CP3592-106
Use clutch to flywheel bolt FP452 (for flywheels with 5/16UNF holes).
Torque capacity: 848Nm(625lb/ft).
Popular clutch plates (2 required):
7/8" x 20 spline - CP2012-166FM3
1" x 23 spline - CP2012-165FM3
20mm x 17 spline - CP2012-184FM3
Replacement spare parts:
Wear clips - CP3912-102
Main pressure plate - CP3021-101
Intermediate pressure plate - CP3592-106
Use clutch to flywheel bolt FP452 (for flywheels with 5/16UNF holes).
Torque capacity: 532Nm(392lb/ft).
Popular clutch plates (2 required):
7/8" x 20 spline - CP2012-166FM3
1" x 23 spline - CP2012-165FM3
20mm x 17 spline - CP2012-184FM3
Replacement spare parts:
Wear clips - CP3912-102
Main pressure plate - CP3021-101
Intermediate pressure plate - CP3592-106
Use clutch to flywheel bolt FP452 (for flywheels with 5/16UNF holes).
AP RACING BRAKE CALIPER CP2577-14E
- universal, 2 piston aluminium brake caliper
- fits rear axle for rally or track
- side mount
- alu pistons
- piston diameter 44,5
- brake disc diameter 267mm
- brake disc thickness 20,6mm
- weight 1,1kg
- inlets 3/8 UNF
- mounting holes distance 89mm
- brake pads CP2399D43 Ferodo FCP825
AP RACING brake caliper CP5020-21S0 LEFT
??Applications:
- Lightweight Single Seater..
- F2 Rally Rear.
- Race Rear.
Features:??
- Radial Mount, 130.0mm x 17.5mm centres.??
- Cast Aluminium alloy body.??
- Suits ??280.0mm x 9.6mm solid disc.??
- Aluminium alloy Pistons.
- High temperature seals.
- Split pin pad retainer.
- Stainless Steel wear plates.
AP RACING brake caliper CP5020-21S0 RIGHT
??Applications:
- Lightweight Single Seater..
- F2 Rally Rear.
- Race Rear.
Features:??
- Radial Mount, 130.0mm x 17.5mm centres.??
- Cast Aluminium alloy body.??
- Suits ??280.0mm x 9.6mm solid disc.??
- Aluminium alloy Pistons.
- High temperature seals.
- Split pin pad retainer.
- Stainless Steel wear plates.
AP RACING brake caliper CP5317-2S0 LEFT
IMPORTANT NOTE:
As from January 1st 2015, CP5316 and CP5317 caliper families no longer include brake pads. CP5119D50 pads to be purchased seperately.
APPLICATIONS
- Lightweight Front or Rear
FEATURES:
- Radial Mount, 130mm x 27.5mm centres.??
- Suits ??332 x 26mm Disc.
- Aluminium alloy body.
- Aluminium alloy pistons.
- Boot type dirt seals fitted.??
- Advanced Red or Black Anti-Corrosion paint finish.
- Pin pad retainer with 'R' Clip.??
AP RACING brake caliper CP5317-2S0 RIGHT
IMPORTANT NOTE:
As from January 1st 2015, CP5316 and CP5317 caliper families no longer include brake pads. CP5119D50 pads to be purchased seperately.
APPLICATIONS
- Lightweight Front or Rear
FEATURES:
- Radial Mount, 130mm x 27.5mm centres.??
- Suits ??332 x 26mm Disc.
- Aluminium alloy body.
- Aluminium alloy pistons.
- Boot type dirt seals fitted.??
- Advanced Red or Black Anti-Corrosion paint finish.
- Pin pad retainer with 'R' Clip.??
AP RACING brake caliper CP6720-8S4L LEFT
??Applications:
- CP6720 Suitable Front Caliper for:
S2000 and Rally Raid.
- CP6730 Suitable Rear Caliper for:
S2000 and Rally Raid.
NB. CP6720 can be used as a rear caliper also.
Features:??
- CP6720 has differential bores.
- CP6730 has equal bores.
- Radial mount, 180 x 35.0mm.
- Suits ??356 / ??285 x 28mm discs.
- Two piece Aluminium alloy body.
- Internally ported.
??- no external bridge pipes.
- Protected bleed screw.
- Aluminium piston standard
??- Stainless steel optional.
AP RACING brake caliper CP6720-8S4L RIGHT
??Applications:
- CP6720 Suitable Front Caliper for:
S2000 and Rally Raid.
- CP6730 Suitable Rear Caliper for:
S2000 and Rally Raid.
NB. CP6720 can be used as a rear caliper also.
Features:??
- CP6720 has differential bores.
- CP6730 has equal bores.
- Radial mount, 180 x 35.0mm.
- Suits ??356 / ??285 x 28mm discs.
- Two piece Aluminium alloy body.
- Internally ported.
??- no external bridge pipes.
- Protected bleed screw.
- Aluminium piston standard
??- Stainless steel optional.
AP RACING brake caliper CP7600-3S0 LEFT
??Applications:
- Performance Road Front.
- Factory Big Brake Kits.
Features:??
- Radial Mount, 130mm centres.??
- Suits ??295 x 24mm thick discs.
- Cast two piece Aluminium alloy body.
- Aluminium alloy pistons.
- Boot type dirt seals fitted.??
- Advanced Red or Black anti-corrosion paint finish.
- Steel wear plates.
- Pad anti-rattle clip fitted.
AP RACING brake caliper CP7600-3S0 RIGHT
??Applications:
- Performance Road Front.
- Factory Big Brake Kits.
Features:??
- Radial Mount, 130mm centres.??
- Suits ??295 x 24mm thick discs.
- Cast two piece Aluminium alloy body.
- Aluminium alloy pistons.
- Boot type dirt seals fitted.??
- Advanced Red or Black anti-corrosion paint finish.
- Steel wear plates.
- Pad anti-rattle clip fitted.
AP RACING brake caliper CP8350-12S4 LEFT
Applications:
- R2 Rally or similar series.
Features:??
- Radial mount, 152 x 39.8mm centres.
- Suits ??285 or ??310mm x 26mm discs.
- Lightweignt Forged Aluminium alloy construction.
- Aluminium alloy pistons.
- High temperature, low drag seals fitted as standard.
- Manufactured with bleedscrew and pipe protection.
- Stainless steel pad abutments and wear plates fitted.
AP RACING brake caliper CP8350-12S4 RIGHT
Applications:
- R2 Rally or similar series.
Features:??
- Radial mount, 152 x 39.8mm centres.
- Suits ??285 or ??310mm x 26mm discs.
- Lightweignt Forged Aluminium alloy construction.
- Aluminium alloy pistons.
- High temperature, low drag seals fitted as standard.
- Manufactured with bleedscrew and pipe protection.
- Stainless steel pad abutments and wear plates fitted.
AP RACING brake caliper CP8351-4S0L LEFT
Applications:
- R2 Rally or similar series.
Features:??
- Radial mount, 152 x 40.8mm centres.
- Suits ??285 or ??310mm x 26mm discs.
- Lightweignt Forged Aluminium alloy construction.
- Stainless steel pistons.
- High temperature, low drag seals fitted as standard.
- Manufactured with bleedscrew and pipe protection.
- Stainless steel pad abutments and wear plates fitted..
AP RACING brake caliper CP8351-4S0L RIGHT
Applications:
- R2 Rally or similar series.
Features:??
- Radial mount, 152 x 40.8mm centres.
- Suits ??285 or ??310mm x 26mm discs.
- Lightweignt Forged Aluminium alloy construction.
- Stainless steel pistons.
- High temperature, low drag seals fitted as standard.
- Manufactured with bleedscrew and pipe protection.
- Stainless steel pad abutments and wear plates fitted..
AP RACING brake proportioning valve knob
AP RACING brake proportioning valve lever
AP RACING brake proportioning valve lever
AP RACING Cerametallic 3 paddle disc 14h x 25,40 184MM
Cerametallic 3 paddle 14h x 25,40mm
Diameter 184mm
Thickness 7.1mm
AP RACING Cerametallic 3 paddle disc 20h x 22,23 184MM
Cerametallic 3 paddle 20h x 22,23 mm
Diameter 184mm
Thickness 7.1mm
AP RACING Cerametallic 3 paddle disc 21h x 23,37 184MM
Cerametallic 3 paddle 21h x 23,36mm
Diameter 184mm
Thickness 7.1mm
AP RACING Cerametallic 3 paddle disc 23h x 25.40 184MM
Cerametallic 3 paddle 23h x 25,40mm
Diameter 184mm
Thickness 7.1mm
AP RACING Cerametallic 4 paddle disc 10h x 29,0 184MM
Cerametallic 4 paddle disc 10h x 29,0mm
Diameter 184mm
Thickness 7.1mm
AP RACING Cerametallic 4 paddle disc 20h x 22,23 184MM
Cerametallic 4 paddle disc 20h x 22,23mm
Diameter 184mm
Thickness 7.1mm
AP RACING Cerametallic 4 paddle disc 23h x 25,4 184MM
Cerametallic 4 paddle disc 23h x 25,4mm
Diameter 184mm
Thickness 7.1mm
AP RACING Cerametallic 4 paddle disc 24h x 25,40 184MM
Cerametallic 4 paddle disc 24h x 25,40mm
Diameter 184mm
Thickness 7.1mm
AP RACING Cerametallic 4 paddle disc 24h x 25,50 184MM
Cerametallic 4 paddle disc 24h x 25,50mm
Diameter 184mm
Thickness 7.1mm
AP RACING Cerametallic 6 paddle disc 20h x 22,23 184MM
Cerametallic 6 paddle 20h x 22,23mm
Diameter 184mm
Thickness 7.1mm
AP RACING Cerametallic 6 paddle disc 23h x 25,4 184MM
Cerametallic 6 paddle 23h x 25,4mm
Diameter 184mm
Thickness 7.1mm
AP Racing ‘Formula’ Clutch Kits are Brand New and comprise a Clutch Cover Assembly and Clutch Driven Plate. No Clutch Release Bearing is included.
The AP Racing Formula Clutch Kits has been specifically designed to meet the demands of modified high performance cars, utilising the latest technology developed from AP Racing clutches.
This kit fits Honda Integra Type R DC2 and Honda Civic 1.6 VTEC with B16A2Z
Diameter: 220mm
Torque Capacity: 245 Nm (181 lbs/ft)
Year: 1993 to 2001
Clutch Kit Type: 2 in 1 Clutch Kit
Driven Plate Type: Organic
NB - NO RELEASE BEARING
AP RACING clutch kit Mitsubishi Evo 4/5/6
Mitsubishi Evo 4,5,6
Torque capacity 415Nm
Sprung Cerametallic disc 23 x 25.4mm
8.0/230mm
AP RACING clutch kit Mitsubishi Evo 7/8/9
Mitsubishi Evo 7,8,9,10
Torque capacity 620Nm
Fixed Cerametallic disc 23 x 25.4mm
8.380/240mm
AP RACING clutch kit Subaru Impreza Wrx Turbo 1993+
AP Racing ‘Formula’ Clutch Kits are Brand New and comprise a Clutch Cover Assembly, Clutch Driven Plate and Clutch Release Bearing.
The AP Racing Formula Clutch Kits has been specifically designed to meet the demands of modified high performance cars, utilising the latest technology developed from AP Racing clutches.
This kit fits Subaru Impreza Turbo / WRX 1993 onwards.
Diameter: 230mm
Torque Capacity: 420 Nm (310 lbs/ft)
Year: 1993>
Clutch Kit Type: 3 in 1 Clutch Kit
Driven Plate Type: Organic