List of products by brand THERMOTEC
Active filters
ThermoTec EXPRESS SLEEVE 12 FEET 1 1/2" I.D.
ThermoTec EXPRESS SLEEVE 12 FEET 1/2"-1" I.D.
ThermoTec EXPRESS SLEEVE 3 FEET 1 1/2" I.D.
ThermoTec EXPRESS SLEEVE 3 FEET 1/2"-1" I.D.
ThermoTec EXPRESS SLEEVE 50 FEET 1 1/2" I.D.
ThermoTec EXPRESS SLEEVE 50 FEET 1/2"-1" I.D.
ThermoTec GOLD HEAT BARRIER 12" X 24" W/ADH
ThermoTec GOLD HEAT BARRIER 24" X 24" W/ADH
ThermoTec GOLD HEAT BARRIER 24" X 50' W/ ADH
ThermoTec GOLD THERMO-SHIELD 1 1/2 X 15
ThermoTec HEAT BARRIER 12" X 12" ADHESIVE BACKED
ThermoTec HEAT BARRIER 12" X 24" ADHESIVE BACKED
ThermoTec HEAT BARRIER 12" X 50' ADHESIVE BACKED
ThermoTec HEAT BARRIER 24" X 36" ADHESIVE BACKED
ThermoTec HEAT BARRIER 24" X 48" ADHESIVE BACKED
ThermoTec HEAT BARRIER 24" X 50' ADHESIVE BACKED
ThermoTec HEAT SLEEVES 1" X 10' BLACK
ThermoTec HEAT SLEEVES 1" X 10' SILVER
ThermoTec HEAT SLEEVES 1" X 3' BLACK
ThermoTec HEAT SLEEVES 1" X 3' SILVER
ThermoTec HEAT SLEEVES 1" X 50' BLACK
ThermoTec HEAT SLEEVES 1" X 50' SILVER
ThermoTec HEAT SLEEVES 1/2" X 10' BLACK
ThermoTec HEAT SLEEVES 1/2" X 10' SILVER
ThermoTec HEAT SLEEVES 1/2" X 3' BLACK
ThermoTec HEAT SLEEVES 1/2" X 3' SILVER
ThermoTec HEAT SLEEVES 1/2" X 50' BLACK
ThermoTec HEAT SLEEVES 1/2" X 50' SILVER
ThermoTec HEAT SLEEVES 3/4" X 10' BLACK
ThermoTec HEAT SLEEVES 3/4" X 10' SILVER
ThermoTec HEAT SLEEVES 3/4" X 3' BLACK
ThermoTec HEAT SLEEVES 3/4" X 3' SILVER
ThermoTec HEAT SLEEVES 3/4" X 50' BLACK
ThermoTec HEAT SLEEVES 3/4" X 50' SILVER
ThermoTec IGNITION WIRE SLEEVING 3/8" X 25' BLACK
These high temperature sleeves can be used for ignition wires, spark plug wires and even fuel lines to prevent vapor lock. Highly flexible and abrasion resistant, they offer maximum protection against spark loss. The inside is braided continuous e-glass insulation good up to 1000??F. The silicone outer surface is good for temperatures up to 500??F.
ThermoTec IGNITION WIRE SLEEVING 3/8" X 25' BLUE
These high temperature sleeves can be used for ignition wires, spark plug wires and even fuel lines to prevent vapor lock. Highly flexible and abrasion resistant, they offer maximum protection against spark loss. The inside is braided continuous e-glass insulation good up to 1000??F. The silicone outer surface is good for temperatures up to 500??F.
ThermoTec KEVLAR HEAT BARRIER
The Kevlar Heat Barrier is made from Kevlar with a Mylar finish. The Barrier can withstand up to 3000 degrees F of radiant heat and can withstand direct contact up to 800 degrees F. The product can be installed using standard rivets with a backup washer or our Heavy-Duty Spray Adhesive. The use of clamps or straps such as Thermo-Tec's Snap Strap can be used to hold the blanket in place for applications on manifolds or exhaust systems. In applications such as a heat shield on the undercarriage above the exhaust the material should be held in place by fasteners as described above. When used as a heat shield, the barrier is installed so the bright metallic surface faces the heat source. When used to retain heat in applications such as exhaust manifolds, the barrier is installed with the fabric side facing the heat. This allows the metallic surface to act as a barrier to prevent the penetration of liquids. Part# 16850
??
ThermoTec KEVLAR MUFFLER COVER
Handles continuous temperatures up to 750 deg F. Reduces radiant heat inside vehicle. Dampens muffler noise and vibration. Includes 3 each, 24 inch and 18 inch stainless steel straps for installation. Neat attractive appearance and is abrasion resistant. Part# 16800
ThermoTec MAT ROLLER
The Mat Roller is a heavy-duty 2" roller used to smooth out adhesive installations to provide a seamless finish. It is ideal for removing air bubbles and flattening imperfections for that perfect look. Ergonomic non-slip cushioned handle allows for extra comfort & control. The Mat Roller???s styling offers easy reach into corners & tight spaces. Part# 14800
ThermoTec MUFFLER OR CATALYTIC CONV HEAT SHIELD KIT
The Muffler/Catalytic Converter Heat Shield is made up of woven silica with a flexible Mylar finish that protects against radiant heat up to 2000 degrees and can withstand direct continuous temperatures of 750 degrees Fahrenheit. The highly-reflective heat shield can be installed between the catalytic converter, muffler, or any other component to reflect radiant heat away from the undercarriage of the car. This versatile heat shield has an unlimited number of applications. The kit includes all necessary fasteners. Part# 16500
ThermoTec PIPE SHIELD - 1 FT. X 4"
The flexible Clamp-On Heat Shield blocks more than 90% of damaging radiant heat from the exhaust.
ThermoTec PIPE SHIELD - 1 FT. X 6" W/4" CLAMPS
ThermoTec PIPE SHIELD - 1FT. X 6"
ThermoTec PIPE SHIELD - 2 FT. X 4"
The flexible Clamp-On Heat Shield blocks more than 90% of damaging radiant heat from the exhaust.