Assembly lube

Assembly lube

Subcategories

Active filters

ARP PTFE based sealers have a rust and corrosion inhibitor. In aluminum, steel, stainless steel, and plastic, they deliver a flexible, leakproof seal against coolants, water, gasoline, natural gas, and LPG. These sealers will be effective from -30 to 550 degrees F, and have a sealant range of 10,000 psi.

  • Prepares potential wear surface and prevents metal contact before adequate lubrication can be supplied
  • Unlike other assembly lubes, Red Line's will not plug filters after initial engine start-up
  • Provides 3x greater film strength than conventional black Molybdenum Disulfide greases
  • Excellent rust and corrosion inhibitor, allows for long-term storage
  • For use on camshafts, lifters, pushrods, piston skirts, bolt threads, main and rod bearings
  • Do not use on exhaust bolts or other high temperature bolts which require an anti-seize
  • Recommended and used by top camshaft and drivetrain manufacturers
  • Outperforms the best conventional or synthetic greases and lubes
  • Withstands extreme temperature and pressure in wheel bearings, U-joints and high-angle CV Joints
  • Excellent high-temp stability, extreme-pressure protection and water resistance
  • Used in a variety of applications with operating temps from -73°C to 260°C
  • Strong resistance to oxidation and corrosion, low evaporation and oil separation with a minimum effect on rubber seals
  • Contains an organic moly for chassis lubrication and high temp/high-speed industrial equipment
  • Synthetic fluidity allows increases in bearing life up to 200%
  • Will darken after high-temp use-not detrimental to performance