Coil resistance [Ohm]: 12
Fitted with Viton upper and lower o-rings

Coil resistance [Ohm]: 12
Fitted with Viton upper and lower o-rings

Coil resistance [Ohm]: 12
Fitted with Viton upper and lower o-rings

Coil Resistance: 9.1 Ohms / High Impedance
Dead Time: 0.45ms at 14 volts
Static Flow Rate @ 43.5 PSI ( 300kPa ) w/Gas: 1700 cc/min = 160 lb/hr
Static Flow Rate @ 50 PSI ( 350kPa ) w/Gas: 1875 cc/min = 180 lb/hr
Static Flow Rate @ 58 PSI ( 400kPa ) w/Gas: 2000 cc/min = 195 lb/hr
Connector: Bosch EV1
Injector Length: O-Ring to O-Ring: 62 mm
Injector Overall Length: 74 mm
Injector Body Diameter: 16mm
O-Ring: 14.5mm Viton
Acceptable Fuels: Gas/Petrol, alcohol/methanol, E85

??

• max 330 liters per hour
• 3bar 285 lph
• 5bar 258 lph
• max pressure 12 bar
• outlet 18x1,5
• inlet 12x1,5
• good for E85 max 500hp

• 18 x 1.5 fits directly to BOSCH 044 pump

Manufacturer number: 0 580 464 200 - replaces the old well-known Bosch 044 pump 0580254044.

Flow rate at 3 bar: 310g/453cm3
Spray type: 2-spray
Housing: standard
Spray angle ??: 15??
Bent angle ??: 10??
Angle between connection and spray level ??: 270??
Resistance: 12??
Fuel compatability: E85, gasoline

Flow rate at 3 bar: 429g/627cm3
Spray type: 2-spray
Housing: standard with extension
Spray angle ??: 25??
Bent angle ??: 0??
Angle between connection and spray level ??: 90??
Resistance: 12??
Fuel compatability: E85, gasoline

Flow rate at 3 bar: 310g/453cm3
Spray type: conical
Housing: standard
Spray angle ??: 20??
Bent angle ??: 5??
Angle between connection and spray level ??: 90??
Resistance: 12??
Fuel compatability: E85, gasoline

• Fuel Pump Inlet Type Threaded
• Fuel Sending Unit Included No
• Negative Ground Yes
• Inlet Outside Diameter 6.35 mm
• Outlet Outside Diameter 6.35 mm
• Voltage 12 VDC
• Length 140.0 mm
• Internal Or External External
• Regulator Included No
• Maximum Pressure 8.0 PSI
• Terminal Type Pin
• Mounting Hardware Included Yes
• Universal Or Specific Fit Universal
• Wire Quantity 2
• Gasket Or Seal Included No
• Seal And Lock Ring Included No
• Terminal Gender Male
• Maximum Flow Rating 50.0 gph
• Strainer Included No
• Inlet Type Threaded
• Outlet Type Threaded
• Outlet Quantity 1
• Minimum Pressure 4.0 PSI
• Mounting Bracket Included Yes

• Fuel Pump Inlet Type Hose Barb
• Fuel Sending Unit Included No
• Voltage 6 VDC
• Internal Or External External
• Regulator Included No
• Terminal Type Pin
• Mounting Hardware Included Yes
• Universal Or Specific Fit Universal
• Gasket Or Seal Included No
• Strainer Included No
• Inlet Type Threaded
• Outlet Type Hose Barb
• Mounting Bracket Included Yes

• Voltage 12 VDC
• Internal Or External External
• Regulator Included No
• Universal Or Specific Fit Universal
• Inlet Type Threaded
• Outlet Type Threaded
• Mounting Bracket Included Yes

• Voltage 12 VDC
• Internal Or External External
• Regulator Included No
• Universal Or Specific Fit Universal
• Maximum Flow Rating 100.0 gph
• Inlet Type Hose Barb
• Outlet Type Hose Barb
• Minimum Pressure 7.0 PSI
• Mounting Bracket Included Yes

• Voltage 12 VDC
• Internal Or External External
• Regulator Included No
• Universal Or Specific Fit Universal
• Maximum Flow Rating 50.0 gph
• Inlet Type Threaded
• Outlet Type Threaded
• Minimum Pressure 6.0 PSI
• Mounting Bracket Included Yes

• Fuel Sending Unit Included No
• Voltage 13 VDC
• Internal Or External External
• Regulator Included No
• Mounting Hardware Included No
• Universal Or Specific Fit Universal
• Gasket Or Seal Included No
• Strainer Included No
• Outlet Type Hose Connection
• Mounting Bracket Included No

• Fuel Sending Unit Included No
• Internal Or External External
• Universal Or Specific Fit Universal
• Gasket Or Seal Included No
• Strainer Included No
• Mounting Bracket Included Yes

• Fuel Sending Unit Included No
• Voltage 12 VDC
• Internal Or External External
• Regulator Included No
• Maximum Pressure 2.0 PSI
• Terminal Type Pin
• Mounting Hardware Included Yes
• Universal Or Specific Fit Universal
• Connector Shape Spade
• Gasket Or Seal Included No
• Maximum Flow Rating 15.0 gph
• Strainer Included No
• Outlet Type Hose Connection
• Mounting Bracket Included Yes

• Fuel Pump Inlet Type Hose Barb
• Fuel Sending Unit Included No
• Voltage 13 VDC
• Internal Or External External
• Regulator Included No
• Maximum Pressure 1.0 PSI
• Terminal Type Lead Wire
• Mounting Hardware Included Yes
• Universal Or Specific Fit Universal
• Gasket Or Seal Included No
• Maximum Flow Rating 20.0 gph
• Strainer Included No
• Inlet Type Hose Barb
• Outlet Type Hose Barb
• Mounting Bracket Included Yes

• hõbedane
• 0-140 PSI
• rising rate

Type: Type S
Regulators Body: Aluminum
Surface Finish: Hard Anodized
Diaphragm Diameter: 33
Vacuum Hose Nipple: 4.5
Fitting Parts: AN6 1/8NPT x2 / #8 Straight 1/8NPT x2
Pressure Adjustability: 2.0kgf/cm2-8.0kgf/cm2

• fits for naturally aspirated engines
• can be used as a transfer pump
• over??200hp engines
• max flow??159 lph
• 0.44 ??? 0.55bar pressure
• 1/4x27 npt threads
• E10-E85 compatible + DIESEL
• adapters sold separately

• fits for naturally aspirated engines
• can be used as a transfer pump
• max flow 129 lph
• 0.48 ??? 0.69bar pressure
• 1/8x27 npt threads
• E10-E85 compatible
• adapters sold separately

• fits for naturally aspirated engines
• can be used as a transfer pump
• max flow 121 lph
• 0.31 ??? 0.49bar pressure
• 1/8x27 npt threads
• E10-E85 compatible
• adapters sold separately

• EXTRA SILENT only 65dB
• fits for naturally aspirated engines
• can be used as a transfer pump
• max flow??95 lph
• 0.1 ??? 0.28bar pressure
• 1/4x27 npt threads
• E10-E85 compatible + DIESEL
• adapters sold separately

• fits for naturally aspirated engines
• can be used as a transfer pump
• up to 200hp engines
• max flow??159 lph
• 0.48 ??? 0.55bar pressure
• 1/4x27 npt threads
• E10-E85 compatible
• adapters sold separately

• for NA engines
• can be used as a transfer pump
• for over 200hp engines
• max flow 159 lph
• 0.48 ??? 0.55bar pressure
• installation kit with 2 rubber bushings included
• replacement 74 micron filter
• 90?? 8 mm hose ends included 2pcs
• E10-E85 compatible

• fits for naturally aspirated engines
• can be used as a transfer pump
• max flow??114??lph
• 0.21 ??? 0.31bar pressure
• 1/8x27 npt threads
• E10-E85 compatible
• adapters sold separately

• fits for naturally aspirated engines
• can be used as a transfer pump
• up to 200hp engines
• max flow 132 lph
• 0.41 ??? 0.48bar pressure
• 1/8x27 npt threads
• E10-E85 compatible
• adapters sold separately